Nano Ceramic® | Advanced Nano Ceramic Coatings & Surface Protection
UV Protection – blocks UVA radiation to prevent fading and surface aging
Permanent Water Repellency – resists water, dirt, dust, and grime
Extreme Chemical Resistance – protects against acids, oils, fuels, and harsh cleaners
Self-Cleaning – anti-stain, anti-algae, and low maintenance
High Heat Tolerance – withstands temperatures up to 550°F
Hardness – up to 9H scratch resistance
Ultra-Thin – performs at just 6 microns per layer
PFAS-Free – safe and sustainable formulation
Easy Application – by spray, roller, or wipe
UVA Topcoat bonds to almost any hard, non-porous surface, including:
Glass, acrylic, plexiglass
Natural stone (marble, granite)
Stainless steel, aluminum, mild steel, zinc
Varnished wood, HPL, melamine, PVC, vinyl
Pre-painted surfaces (epoxy, acrylic, PU)
It is also fully compatible with our professional-grade primers:
SIX1 (Epoxy), SIX3 (PU Wood Filler), SIX4 (Water-Based Acrylic)
UVA Topcoat is trusted across many sectors:
Application Methods:
Spray: HVLP spray gun (1.0–1.3 mm nozzle at 20–30 psi)
Wipe: With cotton pads on flat surfaces like counters
Roll: 6 mm short-nap microfiber roller for walls and ceilings
Preparation Steps:
Clean and degrease the surface
Wet sand with 1500–2000 grit
Final clean with 100% acetone and tack cloth
Apply 1–3 ultra-thin layers (wet-on-wet allowed)
Flash-off time between coats: 5–15 minutes
Fully cured in 5 days (or faster with IR heating)
8 years from a single 6 µm layer
16–24 years with two or three layers (wet-on-wet method)
Yes! When mixed with NANO-CERAMIC® Super Transparent Colorants, UVA Topcoat delivers:
Subtle transparent shades (smoke, champagne, bronze)
Full RAL colors
Metallic or frosted effects
You get modern color with no loss in clarity or performance—ideal for glass, metal, or decorative finishes.
UVA Topcoat is available in multiple hardness levels and finish types:
Gloss / Matte Options:
H9 – MaxHard-LowFlex Very hard, low flexibility
H9 – MedHard-MedFlex Balanced hardness and flexibility
H9 – LowHard-MaxFlex Softer, maximum flexibility for moving or expanding surfaces
Special Finishes:
Anti-Slip Texture (H9) – for floors and bathrooms
Eggshell White (H6) – for interior walls or ceilings
Colorized Versions – transparent or opaque finishes with colorants
Coverage: Up to 80 meter square per 1 Litre (one layer)
Sizes: 500 ml or 1 L, ready to use
Yes. UVA Topcoat is non-toxic, PFAS-free, and complies with FDA food-contact regulations. It’s made with high-molecular-weight polymers that do not degrade into harmful substances and are considered Polymers of Low Concern (PLC) under OECD standards.
Yes. UVA Topcoat is an excellent antifouling top layer for marine applications—reducing drag, resisting marine buildup, and improving fuel efficiency. Ideal for boats in motion or stored on land.
No. UVA Topcoat replaces complex multi-layer systems with a single-layer solution. It reduces labor, material costs, and maintenance—making it the most cost-efficient high-performance coating per year.
UVA Topcoat comes with an 8-Year Limited Warranty, valid when:
Applied by certified professionals
Used on newly built concrete wall surfaces
Maintained using SHRE Pure Shine Reactivating Shampoo only
Registered via our online warranty form at www.nano-ceramic.com
To keep UVA Topcoat performing at its best:
Wash the surface at least twice a year. Use only SHRE Pure Shine Reactivating Shampoo with a mixing ratio of 1:500.
SHRE has a very high viscosity (gel-like) and excellent foaming efficiency. Avoid abrasive materials or chemicals that are not recommended.
Inspect the coated areas every year to ensure there is no damage.
This maintenance will preserve the hydrophobic properties, gloss, and self-cleaning ability at optimal performance.
